Replacement wall charger for the BC146 wall charging unit normally supplied for the Icom IC-A24 and Icom A-6 Transceiver pro packs.Plesae note, this is NOT a wall charger that plugs directly into your radio. This plugs into the BC146 wall charger unit. ...

This software for your PC allows you to transfer data to and from your receiver using the required OPC478U USB cable. To run this set-up you need a PC of at least 500Mhz with a spare USB connector. The software allows memory contents such as frequencies, channel name, bank name, set mode items etc to be transferred. ...

Supplies power and charge to ICA24/ A6. For operation and charging with a 12V/24V cigarette lighter socket. ...

The Icom BC-119 & BC-121 chargers can accept a variety of Icom batteries/radios according to the charger adaptor installed. The AD-101 charge adaptor comes complete with fixing screws to install into the charger, and an AD-99 spacer. ...

Standard Flexible VHF Antenna For IIC-A6, IC-A24, A3 and A22 ...

Replacement mains power charger for the BC-119N Icom fast charger...

LC-122 Leatherette case with plastic clear window that fits nother the Icom A22E and Icom A3. Padded inside and made from atought lether and vinyl compound this will protet your Transceiver from light drops and knocks and scratches....

LC-146A Carrying Case for Icom IC-R6 ...

The ICOM LC-146 carry case protects your R5 radio. The clear window on the front allows operation of the radio and viewing of the screen while the radio is in the case. ...

Soft vinyl water resistant case for the Icom IC-R20 in Black. Clear perspex at the top allows for easy LCD reading. All buttons are accessible...

Soft vinyl water resistant case for the Icom IC-A24/6 Transceivers in Black. Clear perspex at the top allows for easy LCD reading. All buttons are accessible ...

Genuine soft case to suit RX-7 handheld scanner ...

This sofwtare for your PC allows you to transfer data to and from your receiver using the included USB cable!! . To run this set-up you need a PC of at least 500Mhz with a spare USB connector. The software allows memory contents such as frequencies, channel name, bank name, set mode items etc to be transferred. ...

Light-weight, open-air type monaural headphones. Gives you excellent received audio. Weight: 39.5 g; 1.4 oz., Cable length: 1 m; 3.9 ft ...

Designed to meet the demands of the licence free PMR 446 service, the IC-4088SR replaces the IC-446S and builds on its predecessor's functionality, features and operating performance. Featuring a high level of flexibility, the IC-4088SR allows instant communication between members of a group in and around buildings and over sh...

Cloning Software for your Icom A-110 Transciever. Allows you to upload your frequencys and sort and store them on your PC. requires CD-Rom drive and any windows operating software....

Conveniently sized for the airband market, the IC-A110EURO Air Band transceiver is capable of being installed in most vehicles and is specially aimed at airport ground crew. Simplicity and ease of use are the watchwords for the IC-A110EURO. The IC-A110EURO features a limited number of keys and a clear LCD display that makes th...

Designed for the IC-A110E the new HM-161 hand microphone has been designed to supersede the HM-100. The HM-161 has been developed in tandem with the new PMR mobile series microphones for improved durability. There is no change in the functionality of the microphone...

The OPC-515L is a simple DC lead for battery chargers that works with applicable chargers for the Icom IC-A22E and the Icom IC-A3 Transceivers ...

Rotating type belt clip for Icom ICA24 and A6 Transceiver ...

For carrying your IC-R20 receiver on your belt, this is a swivel type attachment allowing rotation through 45 degrees...

The Icom BC119N Fast Charger Kit is for the Icom A6/24 Transceivers and contains the charger, the BC-145 AC adaptor and the AD-101 adaptor cradle so your transceiver sits perfectly in the cup. Chares your transceiver in approx 4 hours. ...

This spare or additional battery case for the Icom IC-A24/A6 uses standard AA batteries for a back up source in case of main battery failure of the Ni-Cad battery. ...

This is a Nickel Metal Hydride (Ni-Mh) replacement authentic Icom BP-210 battery.Its average is 1500 mAh at 7.2V. The battery is especially designed, built and tested to take the tremendous abuse radios have to handle in the field. Premium grade battery cells help to ensure you get more charge cycles, more capacity and greater ...

Allows you to carry your ICA24 or A6 Transceiver on your belt for convenience. ...

This is the OPC-499 Headset adaptor with PTT socket for ICA24E and ICA6. Plug your headset directly into your A24 or A6 transceiver, for use as a back-up to your aircrafts system. ...

Easy one handed operation is the most essential feature of this new series, with large keypad buttons and display screen. A new system know as flip-flop channel recall is now available allowing for the IC-A6/24 to store the last 10 channels used on an updating basis. Most importantly, these new transceivers are NOT compatible...

Easy one handed operation is the most essential feature of this new series, with large keypad buttons and display screen. A new system know as flip-flop channel recall is now available allowing for the IC-A6/24 to store the last 10 channels used on an updating basis. Most importantly, these new transceivers are NOT compatible...

Easy one handed operation is the most essential feature of this new series, with large keypad buttons and display screen. A new system know as flip-flop channel recall is now available allowing for the IC-A6/24 to store the last 10 channels used on an updating basis. Most importantly, these new transceivers are NOT compatible ...

Easy one handed operation is the most essential feature of this new series, with large keypad buttons and display screen. A new system know as flip-flop channel recall is now available allowing for the IC-A6/24 to store the last 10 channels used on an updating basis. Most importantly, these new transceivers are NOT compatible...

The IC-F25SR is the successor to the best selling IC-F22SR and retains the simplicity and functionality that made the original so popular. However, there have been some dramatic improvements, including a stronger construction to withstand rigorous usage. The IC-F25SR is also 5% lighter weighing only 300g. For the security consc...

Icom is pleased to announce details of the IC-R20 handheld receiver. Aimed as the successor to the IC-R10, the IC-R20 has many advanced features incorporated into its clean stylish design including dual watch; built in digital (audio) recorder function; wideband coverage in all modes; high speed scan capability and a standard ...

Rotating type belt clip for Icom IC-R20 Wide Band Receiver allowing you to carry your radio hands free while walking...

Rapid Desktop Charger for Icom IC-R20 chargers the BP-206 Li-ion Battery in under an hour...

This spare or additional battery for the Icom IC-R20 can be charged using the optional BC-156 Rapid desk charger of the BC-07 UK Battery Charger...

The Icom IC-R2500-05 wideband computer receiver connects externally to your PC via a USB cable. The radio can also be controlled via the supplied control head (with not all functions supported). That is right; you can operate the R2500 strictly with the supplied control head. The USB port provides compatibility with many comput...

The Icom IC-R6 AD-92SMA Antenna Connector allows a BNC antenna connection to the SMA antenna connector on your Icom R6...

The OPC-474 cable is a cloning cable that allows you to share data from one receiver to another. It will work with virtually any Icom handheld and we have tested this with the IC-R5, IC-A3 and IC-A22E and can confirm this works fine. Please note, we have only tested cloning between two identical handheld types. ie: IC-R5 to I...

The OPC-478 cable interconnects your IC-R5, your Icom IC-A22E and your Icom IC-A3 to your PC. The OPC-478 cable has a 9-pin D-sub connector on one end, and a 3,5 mm jack plug on the other. The D-sub connector connects to a 9-pin serial port on your PC whereas the jack plug goes (originally) into the earphone socket of your IC-...

Icom CS-R6 Software (optional) programming software for IC-R6Requires Icom OPC-478U USB Cloning cable to link to your PC. Memory contents such as frequencies, channel name, category, group name, set mode items, etc, can be programmed easily ...

Compact Wideband Handheld Receiver While retaining basic features of its popular predecessor the IC-R5, the IC-R6 contains many improvements including 100 channel per second scanning speed, 1300 memory channels, 15 hours of continuous receive capability, optional drop-in charger stand and voice control squelch. All these ne...

Replacement wall battery charger with UK plug that will charge your Icom IC-R5, Icom IC-R6, Icom IC-R20 and Icom IC-RX7 airband radios. This is a 6V 500mA charger designed for 240 volt wall sockets....

Replacement Antenna for your icom IC-R6 and icom IC-RX7 airband radio...

This is a Icom CT-17 CI-V Level Converter for remote transceiver control from a PC equipped with an RS-232C (Serial) port to your Icom IC-R6, Icom RX7 or Icom R20 scanner. ...

The SP-13 Icom Earphone provides clear audio even in noisy environments. Fits any Icom handheld...

The CP-18L is a cigarette lighter cable that provides 6V DC, 2A output from 12V cigarette lighter socket. to power your Icom IC-R5, IC-R6, IC-RX7 & Icom IC-R20. ...

The ICOM OPC-478U is a special USB serial interface cable kit that transfers data from your Icom IC-R5, A24 and A6 to your computer via your PC's USB Socket. The kit includes the OPC-478U interface box, the OPC-1045 USB cable and a driver diskette. The OPC-478U can also be connected to a USB 2.0 port, however it will be tran...

Replacement Mains Power Supply for your Icom IC-R8500 Transceiver...

The Icom ICR8500 Communications Receiver is probably the only receiver you will ever need, with superb coverage from 0.1- 2000Mhz in all modes. Includes new style AD-55 mains power supply. Wide Frequency CoverageThe IC-R8500 covers a wide frequency range from 0.1 to 2000MHz, with 10Hz resolution, while maintaining high receive...

The Icom SP-21 speaker matches many Icom receivers and transceivers. It has a fold out bar to angle the front for more comfortable use. A wired-in audio cable, terminating in a 1/8 inch mini plug included. Specifications: Impedance: 8 ohms Power: 3Watts ...

BP-244 Lithium battery, 3.7V, 1100mAh Li-Ion Battery for IC-RX7 Receiver...

Spare Battery Case for the Icom IC-RX7 airband radio. takes 3 x AA (LR6) batteries...

OC programming Software for your icom IC-RX-7Requires the Icom OPC=478U USB Cloning Cable to link the scanner to your PC to easily edit stored memory channel data....

 IC-RX7 Wideband Handheld Receiver The IC-RX7 is a new exciting handheld receiver from Icom. Slim and stylish in design, this new wideband receiver will appeal to the serious scanning enthusiast and casual listener alike. The IC-RX7 features a water-resistant construction allowing it to be used outside in wet conditions. ...